Sucking Tin Wire 1.5-3.5mm 1.5M BGA Desoldering Braid Solder Wick
Sucking Tin absorption wire for the tin absorbing excess solder, sucking tin absorption line for mobile phone motherboard repair tool, CP-1520, CP-2020, CP-2520, CP-3020, CP-3520 BGA desoldering braid solder remover wick except for the tin absorbing excess solder.
BGA Desoldering Braid Solder Wire CP-1520, CP-2020, CP-2520, CP-3020, CP-3520 Sucking Tin Belt
Braided Copper Wire Desoldering Wick: Quickly removes unwanted solder when used with a soldering iron.
[ Option Tin absorption line ] :
Option 1: CP-1520 — 1.5mm Width, 2.0M Lenght
Option 2: CP-2020 — 2.0mm Width, 2.0MLenght
Option 3: CP-2520 — 2.5mm Width, 2.0MLenght
Option 4: CP-3020 — 3.0mm Width, 2.0MLenght
Option 5: CP-3520 — 3.5mm Width, 2.0MLenght
Warning :
Only touch the grip and the pack of desoldering wick when desoldering. Failure to do so will result in serious burns.
To avoid fire, never use a soldering iron and desoldering wick around combustibles or in an explosive environment.
Caution :
Do not force the tip against the desoldering wick to avoid injury to yourself and/or damage to the parts and PCB.
Do not heat the desoldering wick for more than 5 seconds to avoid damage to the parts and PCB.
Usage :
Place the desoldering wick over the solder to be removed, then push the heated soldering iron tip onto the desoldering wick. The solder will be absorbed.
Remove the desoldering wick after the solder has been absorbed.
Cut off the used section of the wick using nippers.
Repeat steps 1,2 and 3 if the solder is not removed completely. Absorbability may differ depending on the type of solder. Sn63% and 60% (tin content) have good absorbability.
